Wednesday, August 25

Inspired by Pottery Barn: pillow tutorial


The other day I was browsing through my mother's button box when I came across these beauties:



I'm betting they were from a coat back in the 1970's. Who knows? But they were nice, big wooden buttons, so I pulled them out and wondered what I could do with them. A few days later, I got my newest Pottery Barn catalog, and found wonderful pillows created with--you guessed it--buttons!

I just loved those pillows with all their buttony cuteness.  And the fabric from which they were made reminded me of canvas. You know, this kind:




Game on.

The dimensions of the Pottery Barn pillows are 16" x 26", so I cut two rectangles 18" x 28" from my dropcloth. (I always add one inch to each side of my fabric whenever I sew anything. My sewing skills are very elementary, and allowing that one inch seam allowance keeps things simple.)

To create the look of the front of the Pottery Barn pillow, I cut a third panel of fabric 25% shorter than the others, but I added a couple of extra inches to fold under, so that panel was 18" x 23". I folded one end under two inches and pressed it, creating a panel 18" x 21".



See the short panel on top of the long panel?


This panel I placed on top of one of the other panels and pinned it in place, then sewed a straight seam about 1 1/2 inches from the fold. This created one panel to be the front of my pillow. (Note: I am not a good seamstress, but I'm a darn good pinner. Click here to see a pretty shower curtain I made via careful pinning and dismal sewing.)


Once those two pieces were sewn together, I simply took my front and back panels, put them right sides together, and sewed straight seams down the sides. I left a good-sized gap in the bottom for stuffing the pillow. (Click here for a pillow-making tutorial.) Then I turned my pillow cover right side out and pressed it.


And then for the fun part: adding the buttons! I used a tape measure and placed four buttons evenly along the front of the pillow. I used a pencil to make dots on the fabric where the buttons would go. (I just poked the pencil tip right through the button's holes to mark the place).

See the pencil marks?


Now it's starting to look like the real thing!

When the pillow case was all finished, I stuffed an old bed pillow in it and closed up the gap at the bottom.

Voila! A brand-new Pottery-Barn-inspired pillow, all made of materials I had on hand!



What do you think?


facebook facebook facebookPINTEREST

Would you like Imparting Grace delivered to your inbox?


For other great projects inspired by Pottery Barn, check out the The Pottery Barn Challenge at The CSI Project. And for lots and lots of pillows, don't miss the The Pillow Challenge at The CSI Project. Those CSI girls really know how to round up great projects!


The Lettered Cottage



Tuesday, August 24

DIY Textured, Aged Pots




Recently I spent a leisurely time just walking through Pottery Barn, admiring all the accessories. Of the many things that caught my eye, I especially liked the beautiful terra cotta pots. They were brand new, but they looked as if they'd been gracing a garden for years, building up a wonderful patina. These were dotted throughout the store, holding everything from moss balls to topiaries to silk flowers.

Inspired by Pottery Barn, I figured out a way to make my own "aged" pots.

I started with plain terra cotta pots, each about a buck from a garden center.


I sprayed them lightly with this fleck stone spray paint. You should be able to find it with the spray paint at big box home stores, or you can order it from Amazon. It's a little more expensive than regular spray paint, but not outrageous.



I sprayed my pots until they looked like this.


Then I sanded them for a distressed look, and dabbed on some craft paint in a few different shades to mimic the dirt and moss.


That's it!  It couldn't be more simple, and the only pricey part of making it is the spray paint--but one can goes a long way. 


Since then, I've seen other DIY aged pots, but those don't have the texture of the pots that inspired me.  The extra step of applying the Stone spray paint is well worth it!


*This post contains affiliate links.
If you make a purchase after clicking on these links, 
I will earn a small commission. 
Your price will not be affected in any way.
View my full disclosure policy here.*


Thursday, August 19

Custom coasters

I love coasters. And at our house, it's a good thing. All of us take our drinks with us wherever we go, so we need places to set those drinks.

One of my favorite kinds of coasters is the kind of cork-backed hardboard made by Pimpernel and other companies. I think those are very pretty--but they're also very expensive. I was in need of new coasters for my bedroom when I was at the thrift store and spied these beauties:


What? Don't you like Christmas trees?

Well, this part is beautiful:


Four sturdy coasters for $1.00. And all it took was a coating of spray paint to get rid of the Christmas scene.



I wanted pretty coasters to match my homemade bedding, so I used espresso spray paint for the base. Then I added a stencil and

voila!


Custom coasters for my bedroom, all for an investment of $1, a little spray paint, and a little time. Honestly, I think you can spray paint anything! For more wonderful ideas, check out